Just Mixer 2 

Mini USB Audio Mixer 

JUST MIXER 2 is designed and produced by professional sound equipment makers “Maker hart”Audio mixer . JUST MIXER 2 has stylish gold/ silver appearance, lightweight, compact and versatile. It not only has the same volume slider control as last version JUST MIXER, but also raise up amplification to 45dB, so that you can use with most electronic device (computer, smart device, MP3 player, electronic instruments, Amazon Echo/Echo Dot, etc.), even dynamic microphone also can be used with easily. Moreover, it has USB Audio Interface. You can output audio data by USB cable to do Computer music. Also home audio could be conjunct with easily. It’s suitable for gaming , webcast, computer music, street performance or DJ mixer.
 

Technical details

POWER SUPPLY 

5V micro USB power source

 USB AUDIO INTERFACE

Connect to the computer by USB cable

STEREO 3 IN/ 1 OUT CONFIGURATION

3 stereo channels (3.5mm) allows up to 5 mono input connections

OVERLOAD 

LED will light up when signal level overload mixer capacity

PHONE JACK 

Connect stereo headphones

EQ 

Adjust high or low frequency of sound according to personal preference

Controls and Jacks

• 3 x 3.5mm Stereo Inputs (Can be split Into 4 x 1/4" mono; adapter required)
• 1 x 3.5mm Stereo Outputs and 1 x 3.5mm Stereo Headphone Output
• Power / Overload Indicator (LED shows power and presence of overload/distortion)
• EQ Knobs For Ch1 and Ch2
• Master and Channel Volume Sliders
• USB Power / Output Jack

Specifications

• Gain: Max. 45dB
• Power: 5V Micro USB power source
• Weight & Dimensions: 3.2oz / 92g; 2.5 x 4.1 x 0.9" / 10.5 x 6.5 x 2.4cm
• Package Contents: JUST MIXER 2, USB to Micro USB Cable, 5V/1A Adapter, dust-proof pouch, Owner's Manual

Note: Just Mixer 2 does not provide power for microphones, such as condenser and electret microphones, including most lapel or lavalier mics. Microphones of this kind will require an additional preamplifier when used with the Just Mixer 2. Please choose dynamics microphones for use with the Just Mixer 2 or look for the Just Mixer M, which provides power for virtually any mic type.

Setting the volume
Follow these steps to ensure minimum noise and distortion:

1. Step one, increase volume on your audio source (phone, computer, game console, or musical instrument).
2. Next, increase Master Volume fader at least halfway.
3. Increase the volume on the speakers or amplifier you will be listening to to a point slightly above the desired listening volume.
   If using the headphone output, increase the headphone volume wheel on the left side of the mixer.
4. Set all Channel Volumes to zero. Begin playing music or other sounds.
5. Slowly increase Channel Volume faders and watch the indicator LED.
   When the LED is flashing pink once in a while, you are at the right channel volume.
   If it is constantly pink or flashing pink a lot, reduce the Channel Volume.
6. Adjust overall volume using the Master fader, making sure the speakers or amplifier is turned up high enough.
   Note: If the speaker / amplifier volume is too loud, increasing the volume on the mixer may result in distortion.

Video Link

How to use Just Mixer 2 ( DD-PAD & Smart Phone )

https://youtu.be/rJEVKcukMZU

How to use Maker hart Just Mixer 2 to record. ( With Audio USB )

https://youtu.be/ZCoxwLLKHcU
How to use Maker hart Just Mixer 2. (With Amazon Echo Dot )

https://youtu.be/Z9pxnOpUFPQ

Official website: http://makerhart.com/